Recently, many enthusiastic netizens are very concerned about the correct steps of adding water to the battery, and often see someone add “water” to the battery! What water does electric car battery need to add? This question. Others want to know how to fill water bottles. Here is a detailed introduction for everyone, I hope to help you.
What water does electric car battery need to add?
Often see someone add “water” to the battery! Some repairmen add water to the customer’s battery, and some electric owners add water to the battery themselves. Then someone asked, what kind of water does the electric car battery add? Can you add water to every battery? In addition to a small number of vehicles using lithium batteries, the vast majority of electric vehicles now use lead-acid batteries! Lithium batteries do not have the problem of adding water, and the batteries that need to add “water” are mainly lead-acid batteries, especially water batteries. However, this water is not tap water or bottled drinking water. It’s a special electrolyte! Water batteries need to be regularly added electrolyte, otherwise the battery may be scrapped. Valve-controlled sealed lead-acid batteries use colloidal electrolytes and basically do not need to add “water”. Usually, if you add electrolyte, it will dilute the electrolyte inside the battery, and it will not reach the standard of use, but it will damage the battery. Of course, there is no absolute, if you find that the charger does not change the green light when charging the electric car, that is, the battery has been charged, that is to tell you that the charger is not broken or the battery is short of water. What should be done? At this time, you can put the battery upside down, pour out the electrolyte in the battery, and then add a new one, otherwise the new electrolyte is not useful.
It is recommended that you can use a special water adding tool for the battery – the battery water gun to add water, the lead-acid battery water adding operation is complicated and easy to error, the manual water adding control is not accurate, too much or not enough water will affect the balance of the battery characteristics and lead to the reduction of the battery service life, and the operator is prone to safety risks in the face of acid corrosion. The battery water gun is a special tool developed and produced by our company, dedicated to the maintenance of lead-acid battery water, which can make the water maintenance work more efficient and convenient, and can solve the problems of inaccurate manual water control, too much or insufficient water.
Correct steps for adding water to the battery
1. Connect the hose to the water inlet and place the end in distilled water or deionized water
2. Before adding water to the battery, adjust the limit stop to an appropriate position and lock it as required
3. When it is necessary to add water, put the muzzle into the battery injection plug, press the water switch, and the water injection gun starts to work, pump water from the water inlet, and inject water into the target battery through the muzzle. At this time, the working indicator light is green.
4. When the liquid level meets the requirements, the water nozzle will automatically stop working and the working indicator will turn red. In order to avoid failure of the water charging switch at this time, remove the muzzle from the battery and the water charging switch will return to normal function.
Battery water gun is a battery water maintenance tool independently developed by Lianhong. Built-in water pump, mobile power supply, liquid level sensing circuit, can easily fill the battery water, one key water supply, automatic induction shut down, can effectively ensure the consistency of water level, can effectively improve the efficiency of water maintenance, to ensure the consistency of battery unit characteristics after water maintenance. Improve battery performance and service life. For more information, please call: 0710-3313598