At present, there are endless types of batteries on the market, but lead-acid batteries can still maintain their “status” as the most popular battery for electric vehicles, because lead-acid batteries are low in manufacturing cost, simple in process, and lead-acid batteries are repairable. Generally, adding distilled water can prolong the battery life and restore battery life.
Lead-acid batteries can be repaired by adding distilled water. Generally, when the battery is used improperly, the capacity of the battery will drop, and certain water replenishment measures can be taken to repair it. The method of replenishing water is used for repairing, the purpose is to dilute the sulfuric acid with too high concentration to carry out the electrolysis reaction normally, open the upper cover of the battery, and you can see six round holes, inject a certain amount of distilled water into each round hole, and then soak for more than 24 hours.
Whether it is useful to add water to the lead-acid battery after three years of use still needs to be judged according to the situation. If there is less water shortage, it can be repaired by replenishing water. If there is a lot of water shortage, it is impossible to replenish water and electrolyte needs to be added. It should be noted that only distilled water can be used for water repair during maintenance, and other types of water cannot be added, because other water contains metal molecules, which will cause other reactions in the battery, and the battery is easily damaged.
First of all, if your battery has the following situations, you need to add water:
- The battery whose capacity drops below 20% of the new battery is seriously short of water and must be filled with water;
- The battery power drops below 40% of the new battery and more than 20% of the battery lacks more water, it is recommended to add water for repair;
- The water shortage rate in the battery is not high, and its capacity drops below 50% and exceeds 40% of the new battery. If the conditions are met, the repair effect of the battery will be better;
- The capacity is less than 50% of the new battery, basically no water shortage, no need to add;
- Finally, after adding water to the battery, a density measurement needs to be carried out and then assembled. It is still not recommended to do it at home.
How to add water more efficiently and safely to lead-acid batteries?
The automatic battery water filling system can realize accurate and efficient distilled water filling, which can effectively improve the problems existing in manual water filling, and effectively improve the service efficiency and life of the battery through the automatic water replenishment process. Especially in the high-temperature season in summer, due to the heat dissipation problem in the charging area and the influence of high ambient temperature, the loss of distilled water is higher than in other seasons. Through the use of the automatic water-adding system, it is specially used for customers who have more batteries, centralized and Efficient water replenishment operation improves the battery maintenance level, thereby improving the use efficiency of electric forklifts.
The battery automatic water filling system can realize accurate and efficient distilled water filling, which can effectively improve the problems existing in manual water filling, and effectively improve the service efficiency and life of the battery through the automatic water replenishment process. Especially in the high-temperature season in summer, due to the heat dissipation problem in the charging area and the influence of high ambient temperature, the loss of distilled water is higher than in other seasons. Through the use of the automatic water-adding system, it is specially used for customers who have more batteries, centralized and Efficient water replenishment operation improves the battery maintenance level, thereby improving the use efficiency of electric forklifts.