1.Check whether the forklift lithium battery pack thermostat works normally. 2.Check whether the shifting operation of the forklift lithium battery pack transmission is normal。3.Check the tightness of the fan belt of the forklift lithium battery pack。4.Check the diesel tank oil inlet filter for blockage and damage, and clean or replace the filter。5.Check and adjust the valve clearance of forklift lithium battery pack。6.Check and adjust the clearance between the brake pads and the brake drum of the forklift lithium battery pack hand and foot brakes.
Routine maintenance is the maintenance of cleaning the forklift and external inspection as the main content. It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse. The following is a step-by-step introduction.
Check before use(Internal Combustion Forklifts)
Check item
1.Check whether the fuel, lubricating oil, hydraulic oil and coolant are adequate
2.Check the entire vehicle for oil and water leaks
3.Check the working conditions of instruments, signals, lighting, switches, buttons and other ancillary equipment
4.Check if there is any difference in the engine and whether it is working normally
5.Check the technical condition and tightening of steering, brakes, tires and traction gear
6.Check the technical condition and tightening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system
7.Check whether the on-board tools and accessories are safe
(How to maintain electric forklift battery? How to add water for your electric forklift battery?)
Check items at work(Internal Combustion Forklifts)
1.Check the working condition of the engine, chassis, working equipment, hydraulic system, instrumentation and signalling equipment
2.Check axle, brake drum, transmission, torque converter, gear pump and transaxle for normal temperatures
3.Check the condition and tightening of tires, steering and brakes
4.Check the glaze height and temperature of oil, coolant, hydraulic oil, and whether there is any leakage of oil and water in the whole vehicle
Maintenance items after returning to the warehouse
Check item
1.cleaning vehicle
2.Add fuel, check lubricating oil, coolant, hydraulic oil, hydraulic oil, if antifreeze is not added in northern winter or there is no warm storage, it should be put into the coolant
3.Check the integrity and tightness of the V-belt
4.Check tire pressure
5.Check the tightening condition of the fork frame and lifting chain tension bolts
6.Check the lift tank, tilt cylinder, steering cylinder and each pipe joint for leakage
7.Troubleshoot faults found at work
8.Check and organize on-board tools and accessories
9.The following items should be added every 40~50h of work: cleaning each air filter; cleaning the outside of the battery, checking the electrolyte level and the cleanliness and tightening of the electrode column and connecting wire；Check distributor contacts, lubricate distributor shaft and cam; check and fasten loose bolts on the outside of each component；(8) Lubricate and adjust the hoisting chain for the water pump bearing, the kingpin of the steering knuckle, the ball head pin of the horizontal and straight tie rods, the horizontal pin of the inclined oil tank, and the center pin of the triple plate.