The capacity of the battery drops after adding water, which is also the distress of many users. What is the reason? In fact, repairing the battery is symptomatic rather than adding water blindly. Even adding water is not that simple. Adding it just right requires the separator to be fully absorbed, not dry and not overflowing, and the six grids are balanced. But many of them add too much, how to remedy the battery with too much water? How to add water correctly?
What is the effect of adding too much water to the battery? How much water is appropriate?
If too much water is added to the lead-acid battery, the forklift battery may overflow during charging and moving, resulting in a decrease in the overall specific gravity of the battery, a decrease in performance, water in the tank and corrosion, and may even cause a short circuit in severe cases.
It is necessary to add water to lead-acid batteries several times in small amounts, and it is strictly forbidden to add too much water beyond the maximum liquid level. In addition, carefully read the battery manual and the warning label on the battery box, and try to add water to the forklift battery according to this standard, which is helpful for efficient use and correct maintenance of the battery, and prolongs the service life of the battery. It is not recommended to add water when the battery is in use. Water should be added at the end of charging (one hour before the end of charging). When charging, the internal bubbles of the battery are churning and the reaction is violent. to a balanced effect.
How to remedy the excess water in the battery? How to add water correctly?
When the battery is filled with water, the remedy is relatively simple. You only need to use a water-filling straw to suck some out from the water-filling hole until the liquid is no longer visible at the plate. When adding water to the battery, you should adhere to the principle of small amounts and multiple times, and do not add too much at one time.
However, manual water filling often has problems such as missing water, under-filling, and over-filling, which will cause battery damage and affect its service life. To solve this problem, an automatic water replenishment system can easily solve it and completely replace manual water. Maintenance: when Adding water, how to add, and how much to add have completely completed the automatic replacement of the manual link in water addition maintenance, and converted manual water addition maintenance into automatic equipment maintenance.
How to avoid the problem of too much or not enough water in lead-acid batteries?
Lead-acid batteries require daily addition and maintenance of distilled water. Due to the lack of maintenance and management of lead-acid batteries by some users, lead-acid batteries are not filled with distilled water in a timely, effective and accurate manner, or too much distilled water is added, which will lead to battery performance degradation and lead to its use. The efficiency is low, which in turn affects the performance of the equipment itself. It can be equipped with a set of battery automatic water replenishment system, which can automatically replenish water when it is short of water, and automatically stop when it is full of water to ensure the consistency of the liquid level of each cell of the battery, which can effectively avoid problems caused by manual water addition.
The crown forklift battery watering system is a patented product independently developed by Hubei Lham. It is an automatic water replenishment device developed for liquid-rich batteries. It can completely replace the manual maintenance of batteries. It can monitor the water shortage status of the battery in real time, automatically replenish water, and automatically stop when it is full of water. , After the equipment is installed, the electrolyte level can be kept in a healthy state throughout the whole process, ensuring the stability and balance of the electrolyte characteristics of the battery, optimizing the use efficiency of the battery equipment, and prolonging the service life of the battery.
Compared with the time-consuming and labor-intensive traditional manual water replenishment, this product does not require manual operation. It adopts an automatic water replenishment system, which can make the battery life longer and run better; it also saves costs, safety, time and convenience, prolongs battery life and Enhanced performance and easy installation make it suitable for any environment. This product has won the national technology patent, and will soon occupy a large market share by virtue of its product advantages.