Technical Parameters Working Voltage: 12-16.8V Pipe Diameter:D8mm Working Current:200mA(MAX) Stand-by Current:<10mA Rate of Flow: 1L/Min
Battery Specification Voltage:12-16.8V Capacity: 1500mAH DC:16.8V
Level calibration of nozzle clamps, automatic stop when water is full
Portable storage toolbox, mobile power supply is ready to use
Battery water filling gun
It is a special tool for watering maintenance of lead-acid batteries, Make water maintenance work easy and efficient
Product information
1.liquid level sensor head; 2.limit clamp; 3.water inlet; 4.control panel; 5.mobile power; 6.work indicator light; 7.power indicator light; 8.switch
Technical Parameters:
Working Voltage:12-16.8V; Pipe Diameter:Φ8mm; Working current:200mA(MAX); Stand-by current: ≤10mA; Rate of flow: 1L/min;
Battery Specification:
Voltage:12-16.8V; Capacity:1500mAH; DC: 16.8V
Operation Guide
1.Connect the hose to the water inlet and put the end into distilled or deionized water
2.Before adding the water to the battery, adjust the limit clamp to a appropriate position and lock it according to the needs of use.
3.When filling water, put the battery filling plug into the liquid injection valve port, press the water filling switch, and the water filling gun starts to work. The water is pumped from the water inlet, and the target battery is filled with water through the liquid injection valve port. At this time, the working indicator light is green.
3. Using limit clamp to control liquid level
When working, the light is green.
4.When the liquid level meets the requirements, the water filling gun will automatically stop working and the working indicator will turn red. In order to avoid accidental touches, the water filling switch will fail at this time. After the muzzle is removed from the battery, the water filling switch function will return to mormal.
When water if full, indicator light turns red, adding water complete.
Cautions:
1. Do not pump strong corrosive liquids.
2.Do not pump adhesive liquids.
3.When not in use for a long time, please remove the battery and save.
4.When not in use for a long time, please remove the battery and save.
5.When the battery is low in power, please charge it in time, and do not store it for a long time with low power.
The product pictures are for illustration only, and will be designed separately in the follow-up.