As a traditionally used battery, lead-acid battery has become a common battery in daily life due to its low cost and rechargeable advantages. Adding water to reuse is a common method, so when the liquid level of the lead-acid battery is too low, under what circumstances is it allowed to add water to make it work better?
1.The normal water addition (ordinary) of the battery should be done once, add water to the upper limit of the standard liquid level, then adjust the charging current to about 1/2 of the 10h discharge rate, and charge until most of the batteries emit bubbles.
2. For unattended substations, when the patrol inspection finds that the liquid level of the battery is too low, a small amount of water should be added to make the liquid level slightly higher than the plate, and then charged with a current of 1/2 of the 10h discharge rate. After bubbles appear, add water to the standard liquid level, and then charge for 2 hours.
3. In general, it is not allowed to add water during regular charging and discharging, so as not to affect the measurement result of electrolyte density, because the measured density value is used as the basis for judging whether the battery is fully charged (not lower than the density before discharge), Add water and you can’t compare. So you should add water after charging, and then charge for 2 hours.
How to add water to lead-acid battery?
The electrolyte of the storage battery is made of sulfuric acid and distilled water in proportion. During the use of the electrolyte, the temperature of the battery rises, and the charging and discharging are frequent. This process will cause the imbalance of the electrolyte ratio, and even the concentration of sulfuric acid will increase to form corrosion. Therefore, To regularly supplement the right amount of distilled water to make up for water consumption. Only by adding an appropriate amount of distilled water can the normal charge and discharge function of the electrolyte be maintained and the service life of the battery maintained.
The battery water gun can make battery water maintenance more convenient, safe, and efficient. It is a fool’s way to add water with one button, and the water will automatically stop when the water is full, ensuring the consistency of the liquid level of the single battery. The muzzle limit stopper controls the liquid level height, the water full sensor stops automatically, it is easy to carry, and can be used at any time.
Pain points of common water-adding tools:
1.Consuming labor costs: the operation is complex and requires repeated actions;
2. Inaccurate water addition: Manual water addition cannot accurately determine the water level with the naked eye, and the optimal maintenance level cannot be reached;
3. Inconvenient to carry: cannot easily carry around
Our battery watering gun advantages:
Automatically add water, save labor cost;
Automatically sense the water level and stop automatically when the water is full;
Simple operation; easy to carry;