As the use of electric forklifts becomes more and more common, how to maintain and maintain forklift lead-acid batteries is particularly important. An important part of the maintenance work is to replenish distilled water to the forklift battery in time, because the battery is in use. Water will be lost during the process, so it is necessary to replenish distilled water or deionized water to the forklift battery in time. This can prolong the service life of the forklift lead-acid battery.
The forklift battery lead-acid battery is particularly important, so how to hydrate the most time-saving and labor-saving, today I will recommend a Lham automatic battery watering system to everyone. After installing this water replenishment system, you no longer have to worry about the lack of water in the forklift lead-acid battery.
What is automatic battery watering system?
The battery water replenishment system is an automatic water replenishment device developed for liquid-rich batteries. It can completely replace the manual maintenance of the battery, monitor the water shortage status of the battery in real time, automatically replenish water, and automatically stop when it is full of water. After the equipment is installed, the electrolyte level can be adjusted. Keep in a healthy state throughout the process, ensure the stability and balance of the battery electrolyte characteristics, optimize the use efficiency of battery equipment, and prolong the service life of the battery.
Lianhong battery automatic water replenishment system series consists of a floating control liquid injection plug kit, a liquid level sensor, an intelligent water replenishment controller, and a water supply tank. It can monitor the battery liquid level status in real time, automatically replenish water when it is short of water, and automatically stop when it is full of water, so that the battery liquid level is always in the healthiest state, effectively improving battery performance and extending battery life.
The unique full-coverage water tank design of Lham battery automatic water replenishment system can protect the battery from physical damage caused by improper operation, prevent dirt and dust, ensure the daily cleaning of the battery in a heavily polluted environment, and effectively reduce the accumulation of dirt and dust The resulting battery short circuit and increased self-discharge.
Why choose to use an automatic water replenishment system?
Lead-acid batteries are divided into lean and flooded batteries. Lean liquid (maintenance-free) battery means that the battery does not need to add water during use. The electrolyte in the battery is absorbed by the glass fiber separator. Even if the battery is turned over 180 degrees, the electrolyte inside will not pour out.
Relatively speaking, it is a flooded battery. After using a flooded lead-acid battery for a period of time, the electrolyte inside the single battery will decrease with the evaporation of water vapor during use, so water must be added regularly to prevent the battery from dry up. The common way to add water is to add water manually. It takes a long time to add water and the liquid level is uneven after adding water. The uneven liquid level will cause the specific gravity of sulfuric acid inside the battery to be inconsistent, which will directly affect the discharge performance of the battery. The automatic water filling system means that after the water inlet pipe is connected, pure water will automatically enter each single battery, and the float will be lifted up as the liquid level rises, and the water injection port will be blocked at the same time until the buoyancy pushes up to The top end closes the liquid injection port, so as to achieve the goal of automatically adding water.